ALH1 PVC R12 sin elox perfil de escalera de aluminio

Perfil de escalera fabricado en aluminio, inserto de PVC en el peldaño, antideslizante R12. También están disponibles las inserciones antideslizantes R10 y R11.

mm

Inscribirse
y obtén un descuento

Descripción

Perfiles de escalera de aluminio

Comprender por qué nos resbalamos en las escaleras- el primer paso para prevenir accidentes.

Las lesiones más graves en las escaleras ocurren al bajar. También ocurren en ascensos, pero su incidencia es pequeña y las lesiones son menos graves en estos casos. La causa de los accidentes al bajar las escaleras se divide en:

  • Sobrepaso - cuando no identificamos el escalón y entramos en el espacio ante al escalón..
  • Resbalamiento - cuando no hay fricción suficiente en el punto de contacto del escalón y nuestro pie resbala en el escalón.

Si podemos mitigar las causas de estos dos problemas en las escaleras, aumentaremos significativamente la seguridad en las escaleras y evitaremos casi todos estos accidentes. Por tanto, averiguaremos cómo se puede hacer esto.

 

SOBREPASO

Los sobrepasos ocurren con más frecuencia en escalones estrechos de escaleras como se puede ver en escaleras muy empinadas. El pie se ve obligado a pisar el escalón significativamente hacia adelante y en condiciones de poca luz, o cuando todas las escaleras son del mismo color, es muy fácil equivocarse y colocar el pie en el espacio libre frente al siguiente escalón y caer hacia adelante.

Las lesiones en este tipo de caída suelen ser muy graves y pueden causar lesiones permanentes o la muerte.

Al mirar las escaleras desde arriba, parece bastante común que los peldaños se fusionen y forman una rampa. Esto sucede cuando las escaleras son monocromáticas, sin distinción alguna entre ellas. Este problema es mucho más pronunciado en un entorno industrial donde se utilizan escaleras abiertas de celosía para crear un mosaico transparente sin principio ni fin.

 

OVERSTEPPING

Overstepping occurs more often on narrow steps, which are usually also very steep. The foot is forced to tread on the step significantly forward and in low light conditions, or when all the stairs are the same colour, it is very easy to make a mistake and place the foot in the free space in front of the next step and fall forward. Injuries in this type of fall are often very serious, and can cause permanent injury or death. Truly inconvenient.

 

When looking at the stairs from above, it quite common seems that the steps merge into one and form a ramp. This happens when the stairs are the same plain colour, without any distinction between them. This problem is much more pronounced in an industrial environment where open mesh stairs are used to create a transparent mosaic without beginning or end.

 

SLIPPING

Almost all healthy people go down the stairs in the same way. The foot is forwards on the step, with the ball of the foot sticking above the edge of the step, so that the toes are not on the step. We do not step on the main part of the step, it is only contacted when climbing the stairs. This way of walking up the stairs is so common that we can see the area where they are most worn out on almost all the stairs. Peeled paint, chipped wood, carpet fiber sticking out, clearly polished steel. This wear point is very small, only 20-25 mm on the tread side of the step and only about 10 mm on the vertical part of the step, usually close to the center of the step. Take a look at any stairs near you, you'll see it. This constant wear causes the surface to smooth out and lose any traction right where we need it most. In addition, when the stairs are wet, dusty or greasy, there is a high risk of slipping.

 

SOLUTION

One properly fastened quality product can solve the problem of overstepping and slipping at the same time - it is a non-slip stair nosing. Located just above the edge of the step, the non-slip stair nosing will do two things:

 

  • provide a clear contrasting line that defines the edge of the step to prevent overstepping,
  • create a robust high-traction zone exactly where it is needed, at the edge of the tread part.

 

PVC COLOUR INSERT

A special safety PVC insert with pure aesthetics is available in lightly graded colour shades and three degrees of anti-slip properties: R10, R11, R12. Effective even in wet environments, with a long service life. Scratch resistant, easy to wash.

 

GLOW- IN-THE-DARK INSERT

Powerful, self-charging photoluminescent material applied to a thin aluminium sheet, encapsulated with a layer of glass pearls for good anti-slip properties, inserted into the profile of the aluminium stair nosing. In the dark or in an emergency, all the edges of the stairs light up and clearly define the path to safety. Hours of reliable brightness!

Usandola página del operador OLEJÁR, spol. s r.o.
acepta el uso de cookies, con las que mejoramos nuestros servicios.
Más información.